Servicing The Spark Plug - Toro TimeCutter SW 4200 Operator's Manual

Figure 32
5. Slowly pour approximately 80% of the specified
oil into the filler tube (Figure 33).
g027477

Servicing the Spark Plug

Service Interval: Every 200 hours—Check the spark
Every 500 hours—Replace the spark plug(s).
The spark plug is RFI compliant. Equivalent alternate
brand plugs can also be used.
Type: Champion XC12YC
Air Gap: 0.76 mm (0.03 inch)
Removing the Spark Plug
1. Disengage the blade-control switch, move
the motion-control levers outward to the P
position, shut off the engine, and remove the
key from the key switch.
2. Before removing the spark plug(s), clean the
area around the base of the plug to keep dirt
and debris out of the engine.
3. Remove the spark plug
30
Figure 33
plug(s) condition and gap.
(Figure 34).
g201296
ARK