HIKVISION DS-7600NI-Q1 Series User Manual page 171

 You can use the default port No., or change it according to actual requirements.
 External Port indicates the port No. for port mapping in the router.
 The value of the RTSP port No. should be 554 or between 1024 and 65535, while the value
of the other ports should be between 1 and 65535 and the value must be different from
each other. If multiple devices are configured for the UPnP™ settings under the same router,
the value of the port No. for each device should be unique.
Click Apply button to save the settings.
3)
You can click Refresh button to get the latest status of the port mapping.
4)
Step 5 Enter the virtual server setting page of router; fill in the blank of Internal Source Port with
the internal port value, the blank of External Source Port with the external port value, and
other required contents.
Each item should be corresponding with the device port, including server port, http port, RTSP port
and https port.
Network Video Recorder User Manual
Figure 11-24 External Port Settings Dialog Box
Figure 11-25 UPnP™ Settings Finished-Manual
Figure 11-26 Setting Virtual Server Item
170