HIKVISION DS-7600NI-Q1 Series User Manual page 64

 Enable Audio Output: Enables/disables audio output for the selected video output.
 Volume: Adjust the volume of live view, playback and two-way audio for the selected output
interface.
 Event Output: Designates the output to show event video.
 Full Screen Monitoring Dwell Time: The time in seconds to show alarm event screen.
Step 2 Set cameras order.
1) Select a View mode in
supported depending on different models.
2) Select the small window, and double-click on the channel number to display the channel
on the window.
3) You can click
live view.
4) Click the Apply button to save the setting.
You can also click-and-drag the camera to the desired window on the live view interface to set
the camera order.
Step 3 Set the stream type for live view of camera.
Click the More Settings to enter the more settings interface.
1)
Select the camera to configure from the list.
2)
Select the stream type to main stream, sub-stream or Auto.
3)
Network Video Recorder User Manual
Figure 3-8 Live View- Camera Order
, including 1/4/6/8/16-window division modes are
button to start live view for all the channels and click
63
to stop all the