HIKVISION DS-7600NI-Q1 Series User Manual page 168

Step 2 Set the IPv4 Address, IPv4 Subnet Mask, IPv4 Gateway and the Preferred DNS Server in the
Network Settings menu, as shown in Figure 11-20.
Step 3 Click Apply to save the settings.
Step 4 Select the Email tab to enter the Email Settings interface.
Step 5 Configure the following Email settings:
Enable Server Authentication (optional): Check the checkbox to enable the server
authentication feature.
User Name: The user name of sender's account registered on the SMTP server.
Password: The password of sender's account registered on the SMTP server.
SMTP Server: The SMTP Server IP address or host name (e.g., smtp.263xmail.com).
SMTP Port: The SMTP port. The default TCP/IP port used for SMTP is 25.
Enable SSL/TLS (optional): Click the checkbox to enable SSL/TLS if required by the SMTP
server.
Sender: The name of sender.
Network Video Recorder User Manual
Figure 11-20 Network Settings Interface
Figure 11-21 Email Settings Interface
167