Drive System Maintenance; Checking The Tire Pressure - Toro TITAN ZX4800 Operator's Manual

Figure 46
1. Fuse block
Important:
Ensure that the new fuses are
the same type and amperage as the fuses
removed.
2. To replace the engine fuse, remove the console
from the plastic fender.
Figure 47
1. Engine fuse—25 A
3. Grasp the engine fuse and pull it straight and
away from the fuse block
4. Align a new fuse with the slot in the fuse block
(Figure 46).
5. Push the fuse into the fuse block until the fuse
is seated (Figure 46).
g024411
2. Main—30 A
g024412
(Figure 47).
Drive System
Maintenance

Checking the Tire Pressure

Service Interval: Every 25 hours—Check tire
pressure.
Maintain the air pressure in the front and rear tires as
specified. Uneven tire pressure can cause uneven
cut. Check the pressure at the valve stem
Check the tires when they are cold to get the most
accurate pressure reading.
Refer to the maximum pressure suggested by the tire
manufacturer on the sidewall of the caster wheel tires.
Inflate the rear drive wheel tires to 90 kPa (13 psi).
1. Valve stem
39
(Figure
Figure 48
48).
g000554