Driving The Machine - Toro TITAN ZX4800 Operator's Manual

Disengaging the Blade-Control
Switch (PTO)

Driving the Machine

The throttle control regulates the engine speed as
measured in rpm (revolutions per minute). Place
the throttle control in the F
performance. Always operate in the full-throttle
position when mowing.
CAUTION
Machine can spin very rapidly. Operator may
lose control of machine and cause personal
injury or damage to machine.
• Use caution when making turns.
• Slow the machine down before making
sharp turns.
Using the Motion-Control Levers
Use the motion-control levers as shown in
Figure 17
Figure 18
position for best
AST
Figure
g008945
g009174
1. Motion-control
lever—N
EUTRAL
position
2. Center, unlocked position
3. Forward
Driving Forward
Note:
The engine kills if the traction-control levers
are moved with the parking brake engaged.
1. Release the parking brake.
2. Move the levers to the center, unlocked position.
3. To move forward, slowly push the motion-control
levers forward
19.
21
Figure 19
4. Backward
-L
OCK
5. Front of the machine
(Figure 20).
g004532