Setting Object Colors; Loading Large Files - Stratasys P750K User Manual

Setting Object
Colors
Loading Large
Files
DOC08010 Rev. A (DRAFT 1)
The color of objects on the build tray can indicate how they are printed.
Objet Studio enables you to choose the color display so that you can easily
see the material, surface and coating of objects.
To choose how colors are applied on the display:
On the Model Settings ribbon, in the Colors group, select one of the
options from the flyout toolbar.
Color Indicates Model material
Color indicates Model surface
Color indicates if coating is used
Figure 5-59: Colors display options
Before sending a build tray to the printer, or when you perform tray
validation, Objet Studio checks if there is a problem with the stl files or the
positioning of objects on the tray. If so, the affected objects are displayed
with special colors (see "Tray Validation" on page 45).
Very large stl files can be slow to load and may be difficult to manipulate
easily on the build tray. If this is the case, you can display just an image of
the object on the build tray without loading the entire file. The stl file itself
is not changed, and the complete file is sent to the printer.
To display an image of stl files when you place objects on the build tray:
1. From the Tools menu, select
Figure 5-60: Options dialog box, Settings tab
2. In the Large Files section, select
Stratasys P750K User Guide
, and display the Settings tab.
Options
Load Partial (reduced)
.
5–41