Log Configuration; Logout; Status; Help - D-Link DSL-2750U User Manual

Section 3 – Web Configuration

Log Configuration

Choose MANAGEMENT > Log Configuration. The System Log page shown in
the right figure appears.
This page displays event log data in the chronological manner. You can read the
event log from the local host or send it to a system log server. Available event
severity levels are as follows: Emergency, Alert, Critical, Error, Warning, Notice,
Informational and Debugging. In this page, you can enable or disable the system
log function.
To log the events, take the following steps.
Step 1 Select Enable Log check box.
Step 2 Select the display mode from the Mode drop-down list.
Step 3 Enter the Server IP Address and Server UDP Port if the Mode is set to
Both or Remote.
Step 4 Click Apply to apply the settings.
Click View System Log to view the detail information of system log.

Logout

Choose MANAGEMENT > Logout. The page shown in the right figure appears.
In this page, you can log out of the configuration page.
In the main interface, click Status tab to enter the Status menu. The submenus are Device Info, Wireless Clients, DHCP clients, IPv6 Status,
Logs, Firewall logs, Statistics, Route Info and Logout. You can view the system information and monitor performance.
In the main interface, click Help tab to enter the Help menu. This section provides detailed configuration information for the device. Click a wanted
link to view corresponding information.
D-Link DSL-2750U User Manual

Status

Help

65