Tcp/Ip Configuration On A Pc - D-Link DSL-2750U User Manual

Section 2 – Installation
Each network interface on the PC should either be configured with a statically defined IP address and DNS address, or be instructed to automatically
obtain an IP address using the network DHCP server. DSL router provides a DHCP server on its LAN and it is recommended to configure your LAN
to automatically obtain its IP address and DNS server IP address.
The configuration principle is identical but should be carried out differently on each operating system.
The right figure displays the TCP/IP Properties dialog box on Windows 7.
TCP/IP configuration steps for Windows XP are as follows:
Step 1 Choose Start > Control Panel > Network and Internet > Network and
Sharing Center.
Step 2 Choose Change Adapter Settings > Local Area Connection.
Right-click Local Area Connection, and choose Properties.
Step 3 On the General tab, select Internet Protocol Version 4 (TCP/IPv4) and
click Properties. The Internet Protocol (TCP/IP) Properties window
appears.
Step 4 Select the Obtain an IP address automatically button.
Step 5 Select the Obtain DNS server address automatically button.
Click OK to save the settings.
D-Link DSL-2750U User Manual

TCP/IP Configuration On A PC

14