D-Link DSL-2750U User Manual page 25

Section 3 – Web Configuration

Adding a PVC in MAC Encapsulation Routing (MER) or IP Over ATM
(IPoA) mode
If the protocol is selected to MAC Encapsulation Routing (MER), the page
shown as the right figure appears.
1) In Protocol drop-down list, select MAC Encapsulation Routing (MER).
2) In Encapsulation Mode drop-down list, select an option according to the
information provided by your ISP.
3) In WAN IP Setting section, choose an option according to the information
provided by your ISP.
- Obtain address automatically: the dynamic WAN IP address will
be assigned by your ISP.
- Use the following address: A static WAN IP address is provided to
you by your ISP. Input the static WAN IP address and other
information provided by your ISP.
4) In the WAN Service type drop-down list,select Internet_TR069
- Internet: the wan connection is used to access internet.
- TR069: the wan connection is used to management cpe by tr069
server and acs.
Internet_TR069: the wan connection is used to access internet and
-
management cpe by tr069 server and acs.
5) For other entries which are not mentioned above, you can keep them as
defaults.
D-Link DSL-2750U User Manual
23