D-Link DSL-2750U User Manual page 54

Section 3 – Web Configuration
Choose ADVANCED > Network Tools > UPnP. The page shown in the right
figure appears.
In this page, you can configure universal plug and play (UPnP). The system acts
as a daemon after you enable UPnP.
UPnP is used for popular audio visual software. It allows automatic discovery of
your device in the network. If you are concerned about UPnP security, you can
disable it. Block ICMP ping should be enabled so that the device does not
respond to malicious Internet requests.
Click Apply to save the settings.
ADSL
Choose ADVANCED > Network Tools > ADSL. The page shown in the right
figure appears.
In this page, it is recommended to keep it as defaults. The device negotiates the
modulation mode with DSLAM.
Click Apply to save the settings.
Default PVC
Choose ADVANCED > Network Tools > Default PVC. The page shown in the
right figure appears.
Set the default PVC, which you think mostly appears. Input the PVC such as
0/32, 8/81, 0/35...
D-Link DSL-2750U User Manual
52