Troubleshooting - D-Link DSL-2750U User Manual

Hide thumbs Also See for DSL-2750U:
Table of Contents

Advertisement

Section 4 – Troubleshooting
This chapter provides solutions to problems that might occur during the installation and operation of the DSL-2750U. Read the following descriptions
if you are having problems. (The examples below are illustrated in Windows® XP. If you have a different operating system, the screenshots on your
computer will look similar to the following examples.)
1. How do I configure my DSL-2750U Router without the CD-ROM?
Step 1
Connect your PC to the Router using an Ethernet cable.
Step 2
Open a web browser and enter the address http://192.168.1.1
The default username is 'admin' and the default password is 'admin'.
Step 3
Step 4
If you have changed the password and cannot remember it, you will need to reset the Router to the factory default setting (see question 2),
which will set the password back to 'admin'.
2. How do I reset my Router to the factory default settings?
Step 1
Ensure the Router is powered on.
Step 2
Press and hold the reset button on the back of the device for approximately 1 second.
Step 3
This process should take around 1 to 2 minutes.
Note:
Resetting the Router to the factory default settings will erase the current configuration settings.
3. What can I do if my Router is not working correctly?
There are a few quick steps you can take to try and resolve any issues:
Step 1
Follow the directions in Question 2 to reset the Router.
Step 2
Check that all the cables are firmly connected at both ends.
Step 3
Check the LEDs on the front of the Router. The Power indicator should be on, the Status indicator should flash, and the DSL and LAN
D-Link DSL-2750U User Manual

Troubleshooting

66

Advertisement

Table of Contents
loading

Table of Contents