Diagnosis - D-Link DSL-2750U User Manual

Section 3 – Web Configuration

Diagnosis

DSL Test
Choose MANAGEMENT > Diagnosis > DSL Test. The page shown in the right
figure appears. In this page, you can test your DSL connection by clicking Run
Diagnostic Tests.
Traceroute
Choose MANAGEMENT > Diagnosis > Traceroute. The page shown in the
right figure appears. In this page, you can determine the routers on the Internet
by sending packets.
BER Test
Choose MANAGEMENT > Diagnosis > BER Test. The page shown in the right
figure appears. In this page, you can test the bit error rate.
The BER (bit error rate) is the number of bit errors divided by the total number of
transferred bits during a studied time interval. Please set time interval and click
Begin BER Test for the test, and wait the test result for the time interval.
D-Link DSL-2750U User Manual
64