DSL-2750U/NRU Quick Installation Guide System Requirements and Equipment A computer with any operating system that supports a web browser. • A web browser to access the web-based interface of the router: Windows • Internet Explorer, Mozilla Firefox, or Opera. A NIC (Ethernet or Wi-Fi adapter) to connect to the router.
DSL-2750U/NRU Quick Installation Guide 7. Turn on your PC and wait until your operating system is completely loaded. Now you should configure your PC to obtain an IP address automatically (as DHCP client). 1. Click the Start button and proceed to the Control Panel > Network and Internet Connections >...
DSL-2750U/NRU Quick Installation Guide 4. Select the Obtain an IP address automatically radio button. Click the OK button. Click the ОК button. Now your computer is configured to obtain an IP address automatically. PC with Wi-Fi Adapter 1. To connect via 3G network: connect your USB modem to the USB port located on the back panel of the router.
DSL-2750U/NRU Quick Installation Guide 4. Connect the power cord to the power connector port on the back panel of the router, then plug the power adapter into an electrical outlet or power strip. 5. Turn on Wi-Fi: push the relevant button on the back panel of the router.
DSL-2750U/NRU Quick Installation Guide CONFIGURING ROUTER Connecting to Web-based Interface 1. Start a web browser. 2. In the address bar of the web browser, enter the IP address of the router (by default, the following IP address is specified: 192.168.1.1). Press the Enter key.
DSL-2750U/NRU Quick Installation Guide The web-based interface of the router is bilingual (English/Russian). Select a needed language from the menu displayed when the mouse pointer is over the Language caption. You can change the language of the web-based interface in any menu item.
DSL-2750U/NRU Quick Installation Guide In the PPP Settings section, enter authorization data provided by your operator (the username (login) in the PPP Username field and the password in the Password and Password confirmation fields), or select the Without authorization checkbox if authorization is not required.
DSL-2750U/NRU Quick Installation Guide 3. In the Physical layer section, specify the VPI and VCI in the relevant fields, and then select a method of encapsulation from the Encapsulation Mode drop-down list. 4. For the IPoA and IPoE connection types, fill in the IP Address, Netmask, and Gateway IP Address fields in the IP settings section.
DSL-2750U/NRU Quick Installation Guide 5. For the PPPoE and PPPoA connection types, enter authorization data provided by your ISP in the PPP Settings section (the username (login) in the PPP Username field and the password in the Password and Password confirmation fields). If these data have not been provided by your ISP, select the Without authorization checkbox.
DSL-2750U/NRU Quick Installation Guide 5. In the Physical layer section, select the value corresponding to the LAN port that will be used as the WAN port from the Physical interface drop-down list. 6. In the IP settings section, fill in the IP Address, Netmask, and Gateway IP Address fields for the Static IP type.
DSL-2750U/NRU Quick Installation Guide Configuring Local Area Network Go to the Net / Connections page and select the LAN connection. If needed, change the IP address and subnet mask for the LAN interface of the router in the IP Address and Netmask fields of the IP settings section.
DSL-2750U/NRU Quick Installation Guide Configuring Wireless Network By default, the wireless network of the router is open (it requires no password to access it). To avoid unauthorized access to your wireless local area network, change the default settings of the router.
DSL-2750U/NRU Quick Installation Guide Changing Administrator Password It is highly recommended to change the administrator password used to access the web-based interface of the router upon initial configuration. This helps you to improve your network security. 1. Go to the System / Administrator password page.
Quick Installation Guide TECHNICAL SUPPORT You can find software updates and user documentation on our website. D-Link provides its customers with free support within the product's warranty period. Customers can contact the technical support group by phone or by e- mail/Internet.