D-Link DSL-2750U User Manual page 37

Section 3 – Web Configuration
match a rule in the list.
Step 2 Click Add. The page shown as the right figure appears.
Step 3 Enter the MAC address of the PC to be filtered.
Step 4 Enter the filter's schedule or munual schedule
Step 5 Click Apply to add the MAC address.
Security Settings
Choose ADVANCED > Advanced Wireless > Security Settings. In this page,
you can set the security for the wireless network.
Step 1 In the Select SSID drop-down list, select a SSID to be configured. For
example: D-Link.
Step 2 In the Security Mode drop-down list, select a security encryption
mode for the wireless network. It is recommended to select Auto
(WPA or WPA2).
Step 3 In the WPA Encryption drop-down list, select TKIP+AES.
Step 4 Configure the WPA Mode.
- Auto (WPA or WPA2)-PSK: set the pre-shared key (password of
your wireless network) in the Pre-Shared Key field.
- Auto (WPA or WPA2)-Enterprise: enter the port, IP address, and
password of the Radius server. The wireless clients are required to
enter the username and password provided by the Radius server.
Step 5 Set the Group Key Update Interval. For higher security, WPA
password is updated periodically. This value is the update interval of
the WPA password. You can keep it as default.
D-Link DSL-2750U User Manual
35