Dlna; Ip Tunnel - D-Link DSL-2750U User Manual

Section 3 – Web Configuration

DLNA

Choose ADVANCED > DLNA. The page shown in the right figure appears. In
this page, you can enable or disable DLNA.

IP Tunnel

Choose ADVANCED > IP Tunnel. The page shown in the right figure appears.
Configure 4in6 Tunnel
Choose ADVANCED > IP Tunnel > Configure 4in6 Tunnel. The page shown in
the right figure appears. In this page, you can configure IPv4 penetration through
IPv6 network. When only IPv6 access is provided by your ISP, you can access
the Internet via IPv4 and IPv6.
Click Add below the table IPTUNNEL to add tunnel items.
The following table describes the parameters of this page.
Field
Tunnel Name
Tunnel Mode
Wan Interface
Lan Interface
Click Apply to enable the settings.
Click Add below the table DS-Lite IPv4 over IPv6 Tunnel List to add a DS-Lite
item, which is a 4in6 tunnel.
The following table describes the parameters of this page.
Field
Mechanism
D-Link DSL-2750U User Manual
Description
Set a tunnel name.
Select the tunnel mode as 4 in6 or 6in4.
Choose a WAN interface used for the tunnel.
Choose a LAN interface used for the tunnel.
Description
The tunnel type is DS-Lite, which is 4in6 tunnel.
58