Setup; Wizard - D-Link DSL-2750U User Manual

Table of Contents

Section 3 – Web Configuration

Wizard enables fast and accurate configuration of Internet connection and other important parameters. The following sections describe

these various configuration parameters.

When subscribing to a broadband service, you should be aware of the method, by which you are connected to the Internet. The connection

type of your physical WAN device can be Ethernet, DSL, or both. Technical information about the properties of your Internet connection is

provided by your Internet service provider (ISP). For example, your ISP should inform you whether you are connected to the Internet using

a static or dynamic IP address, or the protocol, such as PPPoA or PPPoE, that you use to communicate over the Internet.

Choose SETUP > Wizard. The page is shown as the figure appears on the right.

Step 1

Click Setup Wizard. The page is shown as the figure appears on the

right. There are 5 steps to configure the device. Click Next to continue.

D-Link DSL-2750U User Manual

Setup

Table of Contents