Chroma Studio Force V Phosphor User Manual page 8

Locked:
Display On/Off & Locked/Unlocked:
Factory default sets the display screen of the fixture to turn off and lock when untouched for 30 seconds. (To disable this
feature, see Control Menu below.)
To activate the screen,
1. Tap the screen.
2. 2. 2. 2. Press and hold for 5 seconds the lock symbol on the screen. Follow the text prompt that appears on the screen
"Keep holding for 5sec to unlock."
The lock symbol disappears and the screen is active.
Change DMX Address screen:
The screen shows the current DMX start address and the new DMX start address. In the screen, the numeric command
buttons can be tapped to set the new DMX start address.
Command
Button
0 – 9 Button numbers 0 to 9 for typing the new DMX start address.
Apply Save the new DMX address.
Escape Exit the screen without saving.
Studio Force V Phosphor User Manual
Display Lock Icon
Note:
The Lock Icon turns green
when tapped.
Screen Title
Control Information
Command Buttons
Description
www.chroma-q.com
7 V1.5 December 2014