Chroma Studio Force V Phosphor User Manual page 9

Change Mode screen:
The table shows the control options available in the Change Mode screen:
Command
Button
KHL 3 channels to set Kelvin, Hue, Level:
•
•
•
RGWA 4 channels to set the intensity of each corresponding LED circuit: Red, Green, White and Amber
Look Sel 1 channel to select from the user programmed internal effects.
LookStore Programmed internal effects and looks are accessed and stored through the Look Store screen. A total
of 32 looks can be stored in the fixture's internal memory.
Manual/Mstr The fixture is set as the Master unit for Manual control. Manual control of the fixture's color
temperature (Kelvin), hue (Hue) and intensity (Level) is accessed through the Manual Mode Setting
screen.
Slave The fixture is set as the Slave unit in stand-alone operation. The fixture set as slave unit follows the
control modes set with the Master unit.
Apply Save the settings.
Escape Exit the screen without saving.
Studio Force V Phosphor User Manual
K (Kelvin) - 1 channel to set the color temperature
H (Hue) - 1 channel to set the hue
L (Level) - 1 channel to set the intensity level
www.chroma-q.com
Mode
Control Information
Command Button
Description
8 V1.5 December 2014