Table of Contents
Advertisement
In this menu, internal settings of the Studio Force V Phosphor can be re-configured.
DMX Data
Fan Speed
RotateDisp
Frequency
DMX Lost
Lock
Reset
Upload ENG
Studio Force V Phosphor User Manual
DMX Data
The screen shows the DMX start address, and the equivalent value for each of the DMX channels
assigned to the fixture.
To show DMX Data,
1.
On the Main Menu, tap Setup Menu.
2.
On the Setup screen, tap DMX Data.
Tap Escape to go to the Setup screen.
3.
Fan Speed
The internal fan of the fixture can be set to four speed options to regulate noise levels and the
cooling process.
Fan Speed options:
Quiet
Internal fan is off. (Intensity reduced to 80%)
Studio
Internal fan is on at low speed.
Live
Internal fan is on.
Live-Quiet
Internal fan is on when DMX signal is present.
To set the Fan Speed,
1.
On the Main Menu, tap Setup Menu.
2.
On the Setup screen, tap Fan Speed.
3.
On the Fan Speed screen, select and tap a Fan Speed option, and then tap Apply to
save.
The screen goes to the Setup screen.
Rotate Display
This command rotates the display screen by 180 degrees.
To rotate the display screen,
1. On the Main Menu, tap Setup Menu.
2. On the Setup screen, tap RotateDisp.
The display screen rotates by 180 degrees.
Frequency
In this menu, the fixture can be set to four frequency options. The LED scan rate can be
synchronised with the video camera to avoid a flickering effect.
Frequency options:
1200 Hz
2400 Hz
4800 Hz
9600 Hz
To set the Frequency,
1.
On the Main Menu, tap Setup Menu
2.
On the Setup screen, tap Frequency
www.chroma-q.com
13
V1.5 December 2014
Advertisement
Table of Contents
