Table of Contents
Advertisement
NC1500C
Date/Time
Use this to set the date and time on the projector.
Use the remote controller to input numeric values. For the procedure to input
alphanumeric characters, refer to "Users Manual".
Use the SELECT <Left/Right> buttons to move the cursor (under bar).
Date
Time
New Bulb
When the lamp bulb is replaced, reset the lamp time and select the lamp bulb type. This
menu is active in standby mode only.
Bulb Warning
To set the time for display of lamp bulb warning. This menu is active in standby mode only.
Manual
Use Bulb Entry
D-46
← Displays the currently selected item with asterisk (*).
← Displays the setting
←Select the item to be set
←Input numeric values
Set the date here (Year, month, day).
Set the time here (Hour, minute, second).
← Displays the currently selected item with asterisk (*).
← Displays the setting
Manually specify the warning time (H). Press the SELECT
display the numeric input line (input the value using the remote
controller).
Warning time set by BulbEntry is used.
4. LCD Menu
key to
Advertisement
Table of Contents
