Table of Contents
Advertisement
NC1500C
2.2
Projector installation
Move the projector to the projection position and install it corresponding to the screen and
projection conditions.
To correct the inclination to the right or left of the projector, use the level adjusters at 4
positions.
You can extend the level adjuster to 10 mm at the maximum (Rotate it
counterclockwise for extension).
Caution
To adjust the level adjusters of the projector, extend the two level adjusters at
the front and the back at the same time so that the weight is imposed to them
equally. If you adjust only one adjuster, the weight is not imposed equally, which
may result in level adjuster failure.
2. Setting Up Your Projector
Level adjusters
D-17
Advertisement
Table of Contents
