Table of Contents
Advertisement
4.
LCD Menu
This chapter describes the menus displayed in the LCD screen on the projector's control
panel and their functions. For basic operations of menus, refer to the operation manual.
4.1
List of menu
Menus in parentheses are menus for our service personnel. Normally, these menus cannot be
used.
Main menu
Title Select
"Title Memory name"
TEST Pattern
Configuration
Lamp Setup
(Setup)
(Installation)
Submenu
Selects the title of the signal to be projected.
Selects the test pattern to be projected.
Adjust
Adjusts lamp brightness.
Feedback
Sets the lamp brightness constant mode that
uses a brightness sensor.
Douser Mode
Selects whether to use the douser (screen mute)
when switching signals.
Turret
Controls the turret mounted with an anamorphic
lens.
Ext. MMS Link
Sets whether to connect an external multi-media
switcher (MMS).
Panel Key Lock
Locks the buttons on the projector's control panel
so that they cannot be operated.
GPIO Port
Selects the target of GPIO port control.
FactoryDefault
Returns the settings to their default values (only
macro keys and titles, or all settings).
Image Orient
Selects the projection method (front/rear).
Lens Center
Moves the lens shift position to the center.
MMS Select
Selects the multi-media switcher (MMS) to
connect.
Baudrate
Sets the PC control connector (RS-232C) data
transmission speed (bps).
Date/Time
Sets the date and time on the projector.
New Bulb
Resets the lamp bulb usage time and selects or
edits new entries (only when the projector is in
standby mode).
Description
Ref.
page
D-41
D-41
D-42
D-42
D-45
D-39
Advertisement
Table of Contents
