Table of Contents
Advertisement
3.
Projector Adjustment
and Connecting
3.1
Flow of Adjustment and Connecting
Adjustment and Connecting of the projector accord to the procedure below.
- STEP1
Turning your projector on (See page D-29)
- STEP2
Setting the projector projection method (See page D-30)
- STEP3
Adjusting the primary lens (See page D-31)
Display the test pattern to adjust the screen size, screen ratio and focus.
- STEP4
Mounting and adjusting the anamorphic (See page D-33)
- STEP5
Connecting the image input (See page D-36)
- STEP6
Connecting the various control terminal (See page D-37)
Steps 1 to 6 complete the adjustment and connection of the projector.
projector from the touch panel. Refer to the "Touch Panel Section" for the procedure.
D-28
Next, set up the
Advertisement
Table of Contents
