Mounting The Exhaust Equipment; Mounting The Lamp Bulb - NEC NC1500c Installation Manual

Dlp cinema projector
Hide thumbs Also See for NC1500c:
Table of Contents

Advertisement

NC1500C
2.7

Mounting the exhaust equipment

It is necessary to connect the air outlet of the projector to the exhaust equipment. The
accessory protective sheet should also be mounted because the area around the air outlet
can become very hot.
Mount an exhaust hose to
[1]
the air outlet.
Mount the hose for connection to the
exhaust equipment to the air outlet.
Wrap the protective sheet
[2]
around the exhaust hose.
Wrap the protective sheet to cover the
connection of the air outlet and hose.
Use the accessory
[3]
protective sheet bands (4
bands) to fasten the
protective sheet.
2.8

Mounting the lamp bulb

Mount the lamp bulb to the projector here.
Ask a service personnel to mount the lamp bulb.
Caution
• It is concerned that the lamp bulb would burst under shock or vibration. Make
sure to move the projector to the installation position before mounting the
bulb. In addition, make sure to remove the lamp bulb before moving the
projector to another place.
2. Setting Up Your Projector
D-27

Advertisement

Table of Contents
loading

Table of Contents