When You Use The Service Personnel Menu - NEC NC1500c Installation Manual

NC1500C
(Title Setup)
Information
4.1.1

When you use the service personnel menu

To use the menu for service personnel, you need to input the pass code from the remote
controller.
Press the TEST button while holding down the CTL button of the
[1]
remote controller.
The pass code input screen will be displayed on the LCD screen at the projector's control panel.
Enter your pass code (See Note) using the numeric character
[2]
keys of the remote controller.
After authentication of your pass code, the service personnel menu will become active.
D-40
Bulb Warning
New Lamp House
Bulb Alignment
(Memory) Lamp
Lens
Macro Key Macro Key No.1-8
Lamp Output
Bulb Type [A]
Bulb Type [W]
Bulb Type [H]
Macro Key Macro Key No.1-8
Usage
Error Code
Version System
MMS (Built-in)
IP Address System
Cinema
System (Unwire)
MMS Status
Sets the lamp bulb warning time (only when the
projector is in standby mode).
Resets the lamp house usage time, and makes
settings or selects modes (only when the
projector is in standby mode).
Sets the lamp bulb alignment.
Saves the current lamp setting.
Saves the current lens setting.
Sets the titles to be assigned to the macro keys
of 1 to 8.
Displays the lamp output setting.
Displays the registered name and the
maximum/minimum current setting of the
currently used lamp bulb.
Displays the registered name and the lamp rated
output (kW) of the currently used lamp bulb.
Displays the registered name and the lamp bulb
warning time (Bulb Warning Time) setting of the
currently used lamp bulb.
Displays the titles assigned to the macro keys of
1 to 8.
Displays the usage times of the projector, lamp
bulb, lamp house and bulb warning.
Displays the currently occurring error.
Displays the version of the projector head.
(BIOS, Firmware, Data, and Serial No.)
Displays the version of the built-in multi-media
switcher (MMS). (BIOS, Firmware, Data, FPGA,
and Serial No.)
Displays the SYSTEM IP address.
Displays the CINEMA IP address.
Display the IP address for wireless LAN (when
wireless LAN card is inserted).
Displays the status information of the connected
multi-media switcher (MMS).
4. LCD Menu
D-48
D-49
D-50
D-51
D-51
D-51
D-52
D-53
D-53
D-53