Table of Contents
Advertisement
NC1500C
3.7
Connecting the various control terminal
For control, your projector comes with such ports as the PC control terminal and the Ethernet
port (RJ-45).
PC control terminal
(PC CONTROL)
Ethernet port
(LAN-A/LAN-B)
This completes the adjustment and connection of the projector. Next, set up the projector
from the touch panel. Refer to the "Touch Panel Section" for the procedure.
Use this terminal when controlling the projector in serial
connection from a PC.
Use this port when controlling the projector in LAN connection
from a PC.
3. Projector Adjustment and Connection
D-37
Advertisement
Table of Contents
