Connecting The Image Input - NEC NC1500c Installation Manual

NC1500C
3.6

Connecting the image input

Your projector has four image input terminals, namely, the HDSDI A input terminal, the
HDSDI B input terminal, the DVI-D A input terminal, and the DVI-D B input terminal.
HDSDI A/B input terminal
(SDI A/SDI B)
DVI-D A/B input terminal
(DVI A/DVI B)
Information for Reducing Radiation of Electromagnetic Waves
To reduce unnecessary radiation of electromagnetic waves, use the supplied ferrite clamp
core.
Mounting the ferrite clamp core
Open the accessory ferrite clamp core and
[1]
attach it to the DVI-D signal cable.
When doing so, attach this as close as possible to the end that goes to
the projector.
* Push the catch to open the ferrite clamp core.
Close the ferrite clamp core tightly.
[2]
Fix the supplied band to the signal cable as a
[3]
stopper.
* Pull the end of the band to tighten it. Cut off the surplus of the
band.
• Be sure to use the ferrite clamp core at the end of the DVI-D signal cable.
Note
D-36
Inputs serial digital images from a Video Server or Video
source.
Inputs digital RGB signals from a PC.
3. Projector Adjustment and Connection