Mounting And Adjusting The Anamorphic; Mounting The Anamorphic - NEC NC1500c Installation Manual

NC1500C
3.5

Mounting and adjusting the anamorphic

Mount the anamorphic lens to the anamorphic lens, adjust the anamorphic lens position.
3.5.1

Mounting the anamorphic

Mount the anamorphic lens to the anamorphic lens motorized turret mounted in 2-5.
Loosen the lens clamps (2
[1]
places) and slide the lens
carriage on the slide poles.
Adjust the lens carriage position.
Mount the cross balance to
[2]
the end of the support pole.
Connect the control cable
[3]
for the anamorphic lens
motorized turret.
Mount the anamorphic lens
[4]
to the lens holder and
loosely fix it with lens
clamp screws (2 places).
3. Projector Adjustment and Connection
Lens carriage
Support pole
Lens clamps
D-33