Table of Contents
Advertisement
br6505:admin> fanshow
Fan 1 is OK, speed is 8653 RPM
Fan 2 is absent
br6505:admin>
br6505:admin> chassisshow
FAN Unit: 1
Fan Direction: Forward
Time Awake: 0 days
POWER SUPPLY Unit: 1
Power Source: AC
Time Awake: 0 days
Power Supply #1 is OK
Power Supply #2 is absent
<additional output truncated>
br6505:admin>
Time required
Replacing a power supply and fan assembly in the switch should require less than
two minutes to complete.
Items required
The following items are required to replace a power supply and fan assembly:
v New power supply and fan assembly
v A #1 Phillips-head screwdriver
Removing a power supply and fan assembly
Refer to Figure 14 for this procedure.
2
Figure 14. Removing the power supply and fan assembly
1 Switch chassis
2 Power supply and fan assembly
Complete the following steps to remove a combined power supply and fan
assembly from the switch.
1
3
4
3 Captive screw
4 Label with part number
Chapter 4. FRU replacement
35
Advertisement
Table of Contents
