Cancelling An E-Mail/Ftp Transmission - Sharp MX-M260 Operation Manual

CANCELLING AN E-MAIL/FTP
TRANSMISSION
You can cancel a transmission job that is in progress. Cancellation is done from the scanner job status screen.
You can cancel a transmission after scanning is finished by pressing the [CLEAR] key ( ) or the [CLEAR ALL]
Note
key ( ) while "SENDING. PRESS [C] TO CANCEL." appears in the touch key.
1
Press the [JOB STATUS] key.
SCAN DATA
LINE
FAX
DATA
JOB STATUS SYSTEM SETTING
2
Touch the [SCAN TO] key.
SCAN TO
3
Touch the job key of the transmission
job that you wish to cancel.
The touched key is highlighted.
4
Touch the [STOP/DELETE] key.
STOP/DELETE
If you do not wish to cancel the
Note
transmission, touch the [NO] key.
A message appears to
confirm the cancellation.
Touch the [YES] key to
delete the selected job
key and cancel the
transmission.
4
83