Pamphlet Copy - Sharp MX-M260 Operation Manual

PAMPHLET COPY

The pamphlet copy function is used to arrange copies in the proper order for centre-stapling and folding into a
booklet. Two original pages are copied onto each side of the copy paper, such that a total of four pages are copied
onto each sheet.
This function is convenient for arranging copies into an attractive booklet or pamphlet.
[Example]: Copying 8 originals with pamphlet copy
Originals (one-sided)
1
2
3
4
5
6
7
8
Originals (two-sided)
2
4
6
8
1
3
5
7
1
Touch the [PAMPHLET COPY] key in
the special modes menu screen.
MARGIN SHIFT
PAMPHLET COPY
2
Specify whether 1-sided or 2-sided
originals will be copied.
PAMPHLET COPY
ORIGINAL
1-SIDED 2-SIDED
3
Select the binding position ([LEFT
BINDING] or [RIGHT BINDING]) and
then touch the [OK] key in the
pamphlet copy setting screen.
CANCEL OK
LEFT RIGHT
D
BINDING
BINDING
The finished copies
can be folded.
First page
First page
The pamphlet copy
setting screen will
appear. The pamphlet
copy icon ( , etc.) will
also appear in the upper
left corner of the screen
to indicate that the
function is enabled.
CANCEL OK
LEFT RIGHT
BINDING BINDING
You will return to the
special modes menu
screen.
CONVENIENT COPY FUNCTIONS
• Scan the originals in order from the first page to the
last page. The order of copying will be automatically
adjusted by the machine.
• Either left binding (opening from right to left) or right
binding (opening from left to right) can be selected.
• Four originals will be copied onto one sheet. Blank
pages may be automatically added at the end,
depending on the number of the originals.
4
Touch the [OK] key in the special
modes screen.
You will return to the main screen of copy mode.
5
Place the original(s). (p.23, p.24)
6
Make sure that a suitable paper size
has been automatically selected.
AUTO A4
PAPER SELECT
100%
7
Select the number of copies and any
other desired copy settings, and then
press the [START] key (
8
[When using the RSPF:]
Copying will start after all originals have been
scanned.
9
[When using the document glass:]
Replace the original with the next original and
press the [START] key ( ). Repeat this step until
all originals have been scanned, and then touch
the [READ-END] key.
When the pamphlet copy function is selected,
two-sided copying will be automatically enabled.
To cancel the pamphlet copy function, touch
Note
the [CANCEL] key in the pamphlet copy
setting screen. (See the screen of step 2.)
If the desired copy paper
size is not selected, use
the [PAPER SELECT] key
to select the paper size.
After the paper size is
selected, touch the [AUTO
IMAGE] key. A suitable
ratio will be automatically
selected.
).
45
3