Sharp MX-M260 Operation Manual page 100

SYSTEM SETTINGS (ADMINISTRATOR)
KEYS USED IN ADMINISTRATOR SETTINGS
Example: Auditing mode
SYSTEM SETTINGS
ACCOUNT CONTROL
1
AUDITING MODE
2
TOTAL PAGES PER ACCOUNT
When a checkbox (
1
This indicates that the setting is enabled. If a checkbox with a checkmark (
cleared ( ) and the setting is disabled.
When a key that appears in the form
2
If the settings continue on the following screen(s), touch the
3
screens. To return to the category selection screen, touch the [OK] key.
The currently set numerical value is displayed.
4
Numerical values can be set by touching the
5
98
RESETTING ACCOUNT
) appears in front of a setting, a checkmark (
X X X
OK
1/3
) will appear when the checkbox is touched.
is touched, the setting screen of that key will appear.
and keys to move back and forth through the
and keys.
The following keys appear in screens that
require the entry of numerical values.
20
(1 999)
3
4 5
) is touched, the checkmark is