Scanning To An Ftp Server; Creating An Ftp Shortcut; Creating A Network Folder Shortcut - Sharp MX-C557F User Manual

Scanning
For Macintosh users
Note: Make sure that the printer is added to the computer. For more information, see
computer" on page 275.
1
Load an original document into the automatic document feeder or on the scanner glass.
2
From the computer, do either of the following:
•
Open Image Capture.
•
Open Printers & Scanners, and then select a printer. Click Scan > Open Scanner.
3
From the Scanner window, do one or more of the following:
•
Select where you want to save the scanned document.
•
Select the size of the original document.
•
To scan from the ADF, select Document Feeder from the Scan Menu or enable Use Document Feeder.
•
If necessary, configure the scan settings.
4
Click Scan.

Scanning to an FTP server

1
Load the original document into the ADF tray or on the scanner glass.
2
From the home screen, touch FTP, and then enter the needed information.
3
If necessary, configure other FTP settings.
4
Send the FTP job.

Creating an FTP shortcut

1
From the home screen, touch FTP.
2
Enter the FTP server address, and then touch
3
Create a shortcut.

Creating a network folder shortcut

1
Open a web browser, and then type the printer IP address in the address field.
Notes:
•
View the printer IP address on the printer home screen. The IP address appears as four sets of
numbers separated by periods, such as 123.123.123.123.
•
If you are using a proxy server, then temporarily disable it to load the web page correctly.
2
Click Shortcuts > Add Shortcut.
3
From the Shortcut Type menu, select Network Folder, and then configure the settings.
4
Apply the changes.
.
65
"Adding printers to a