Sharp MX-M260 Operation Manual page 52

CONVENIENT COPY FUNCTIONS
1
Touch the key and then touch the
[COVER] key in the special modes
menu screen.
L
COVER
OT
2
Select the cover(s) that you wish to
add.
SPECIAL MODES
COVER
FRONT BACK FRONT+BACK
To add only a front cover, touch the [FRONT] key. To
add only a back cover, touch the [BACK] key. To add
both a front and back cover, touch the
[FRONT+BACK] key.
3
Specify whether or not the front cover
is to be copied on.
CANCEL OK
CK
PRINT ON FRONT COVER?
YES NO
4
Touch the [OK] key in the cover
setting screen.
Return to the special modes screen.
5
Touch the [OK] key in the special
modes screen.
You will return to the main screen of copy mode.
50
The cover setting screen
will appear.
The cover icon ( , etc.)
will also appear in the
screen to indicate that
the function is turned on.
OK
CANCEL OK
PRINT ON FRONT COVER?
YES NO
Select [YES] or [NO] in
the touch panel. If
[YES] is selected, the
first page of the
document will be
copied onto the front
cover sheet.
6
Load the cover paper to be used into
the bypass tray.
About the steps that follow
See page 24.
• It is not possible to copy on the inside of a
Note
front cover, nor on either side of a back
cover.
• Be sure to place the originals in the RSPF.
The document glass cannot be used for this
function.
• During cover copying, stream feeding mode
will not function even if enabled in the
administrator settings. (See "6. SYSTEM
SETTINGS (ADMINISTRATOR)".)
• To cancel the cover copy function, select
the cover copy function again and touch the
[CANCEL] key. (See the screen of step 2.)
Load the same size of
paper as the paper to
be used for the copy
job.