Using The Rspf - Sharp MX-M260 Operation Manual

5
Make sure that a suitable paper size is
automatically selected, or select
another size using the [PAPER
SELECT] key.
EXPOSURE
AUTO A4
PAPER SELECT
100%
6
Select the number of copies and any
other desired copy settings, and then
press the [START] key (
LOGOUT
UT

USING THE RSPF

1
Place the original(s) in the document
feeder tray. (p.24)
2
Touch the [2-SIDED COPY] key.
2-SIDED COPY
OUTPUT
3
Touch the desired copy mode.
Touch the [BINDING CHANGE] key when making the
tablet binding, or when making automatic two-sided copies
of a one-sided A3 or B4 (11" x 17" or 8-1/2" x 14") size
portrait original, touch the [BINDING CHANGE] key.
Portrait-oriented original
(A3 or B4 (11" x 17" or 8-1/2" x 14") size)
Before [BINDING CHANGE]
).
The original for the front
side is scanned.
After [BINDING CHANGE]
7
Remove the first original and then place
the original for the back side on the
document glass. Close the RSPF and
then press the [START] key (
When making two-sided copies of an odd
Note
number of originals, touch the [READ-END]
key after scanning the last original.
4
Touch the [OK] key.
OK
BINDING
CHANGE
5
Make sure that a suitable paper size is
automatically selected, or select
another size using the [PAPER
SELECT] key.
EXPOSURE
AUTO A4
PAPER SELECT
100%
6
Select the number of copies and any
other desired copy settings, and then
press the [START] key (
LOGOUT
UT
COPY FUNCTIONS
).
To cancel automatic
two-sided copying, press
the [CLEAR] key ( ).
).
29
2