Canceling An E-Mail/Ftp Transmission - Sharp AR-M256 Operation Manual

CANCELING AN E-MAIL/FTP
TRANSMISSION
You can cancel a transmission job that is in progress. Cancellation is done from the scanner job status screen.
You can cancel a transmission after scanning is finished by pressing the [CLEAR] key (
Note
key ( ) while "SENDING. PRESS [C] TO CANCEL." appears in the touch key.
1
Press the [JOB STATUS] key.
LINE
FAX
DATA
CUSTOM SE
JOB STATUS
2
Touch the [SCAN TO] key.
SCAN TO
3
Touch the job key of the transmission
job that you wish to cancel.
The touched key is highlighted.
4
Touch the [STOP/DELETE] key.
STOP/DELETE
If you do not wish to cancel the
Note
transmission, touch the [NO] key.
A message appears to
confirm the cancellation.
Touch the [YES] key to
delete the selected job
key and cancel the
transmission.
) or the [CLEAR ALL]
2
31