Cover Copy - Sharp MX-M260 Operation Manual

COVER COPY

Cover copy mode is used to add a cover to the front or back, or both the front and back, of a multipage document.
To use cover copy mode, the RSPF must be used.
Copying onto a cover
One-sided copies from one-sided or two-sided originals
One-sided originals One-sided copies
(copying onto a cover)
4
3
2
1
2
1
SHARP
Cover original
SHARP
Two-sided originals
4
2
3
2
1
SHARP
SHARP
Cover original
Two-sided copies from one-sided or two-sided originals
One-sided originals
4
3
2
1
SHARP
Cover original
Two-sided originals
3
1
SHARP
Cover original
• A front cover, back cover, or both a front and a
back cover can be selected.
• You can specify whether or not the front cover is
copied on.
• Copying is not possible on either side of a back
cover.
4
3
Back cover
(no copying)
Front cover
(can copy onto front side)
5
4
Back cover
(no copying)
Front cover
(can copy onto front side)
Two-sided copies
(copying onto a cover)
Back cover
(no copying)
3
1
SHARP
Front cover
(can copy onto front side)
(Back side of cover is blank.)
CONVENIENT COPY FUNCTIONS
Not copying onto a cover
One-sided copies from one-sided or two-sided originals
One-sided originals
4
3
2
1
Two-sided originals
3
1
Two-sided copies from one-sided or two-sided originals
One-sided originals
4
3
2
1
Two-sided originals
3
1
• A front cover, back cover, or both a front and a
back cover can be selected.
One-sided copies
(not copying onto a cover)
4
3
Back cover
2
1
Front cover
(not copying onto a cover)
One-sided copies
(not copying onto a cover)
Back cover
3
1
Front cover
49
3