Margin Shift Copy - Sharp AR-M257 Operation Manual

MARGIN SHIFT COPY

The margin shift function is used to automatically shift the text or image on the copy paper approximately 1/2" in its
initial setting.
Image shifted
One-sided copying
to the right
Margin
Two-sided copying
Image shifted
to the right
Or
Margin
1
Touch the [MARGIN SHIFT] key in the
special modes screen.
MARGIN SHIFT
PAMPHLET COPY
2
Select the shift direction.
RIGHT LEFT DOWN
Image shifted
to the left
Margin
Image shifted
to the left
Margin
The margin shift setting
screen will appear.
The margin shift icon
( , etc.) will also
appear in the screen to
indicate that the function
is turned on.
Touch the [RIGHT],
[LEFT], or [DOWN] key.
The selected key will be
highlighted.
CONVENIENT COPY FUNCTIONS
• Right, left or down can be
Image shifted
selected for the shift direction
down
as shown in the illustration.
Margin
• The shift width (margin) can
be set from 0" to 1" in
increments of 1/8".
• If [DOWN] key is selected,
set the original(s) so that the
margin to be increased is set
to the rear side of the RSPF
or the document glass.
Image shifted
down
Margin
3
Adjust the shift width as needed and
touch the [OK] key.
OK
CANCEL OK
SIDE 1 SIDE 2
(0 1) (0 1)
1/2 1/2
inch inch
4
Touch the [OK] key in the special
modes screen.
You will return to the main screen of copy mode.
About the steps that follow
If you are using the document glass, see page 22.
If you are using the RSPF, see page 23.
• When margin shift is selected, rotation
Note
copying will not function.
• This feature cannot be used with paper that
is not a standard size.
• To cancel the margin shift function, touch
the [CANCEL] key in the margin shift
setting screen. (See the screen of step 3.)
Use the and keys
to set the shift width. The
shift amount can be set
from 0" to 1" in
increments of 1/8".
41
3