Response Number Codes / Messages - Motorola V.3600 User Manual

Response Number Codes / Messages

Response number codes, messages, and their meanings are as follows.
The connect rates are serial port rates (DTE), not DCE rates.
Message
Code
0 OK
1 CONNECT
2 RING
3 NO CARRIER
4 ERROR
5 CONNECT 1200
6 NO DIAL TONE
7 BUSY
10 CONNECT 2400
, CONNECT 4800
11 15
, CONNECT 9600
12 18
20 CONNECT 300
22 CONNECT 7200
23 CONNECT 12000
24 CONNECT 14400
25 CONNECT 16800
26 CONNECT 19200
27 CONNECT 21600
28 CONNECT 24000
29 CONNECT 26400
30 CONNECT 28800
Meaning
Command received
Connect at 300 bps while X1, X2,
X3, or X4 command in effect; all
rates while X command in effect
Ring detected
Valid carrier not detected within
period specified by register S7, or
carrier lost for value of S10 or
more
Command not recognized or too
long
Connection made at 1200 bps
No dial tone detected for 5
seconds (X2 or X4 command in
effect)
Dialed number busy (X3 or X4
command in effect)
DTE rate 2400 bps
DTE rate 4800 bps
DTE rate 9600 bps
DTE rate 300 bps
DTE rate 7200 bps
DTE rate 12000 bps
DTE rate 14400 bps
DTE rate 16800 bps
DTE rate 19200 bps
DTE rate 21600 bps
DTE rate 24000 bps
DTE rate 26400 bps
DTE rate 28800 bps
V.3600
AT Commands
5-9