Shelf-Mount RM16M V.3600 Installation
Go to Appendix C, Hardware Options to check the board options before
installation.
Shelf-mount RM16M V.3600s should be installed or replaced by
personnel familiar with shelf-mount installation. The unit has an edge
connector that inserts into a receptacle located on the backplane and
power bus.
Note
Figure 2-5 represents a typical dialup connection using one of
the most common rack shelves. Connect cables as appropriate
for any compatible RM16M shelf.
RJ11C, RJ45S or
RJ11C jack, installed
RJ41S jack installed
by telephone
company
To DTE
Shelf backplane
(with RM16M V.3600 installed)
Figure 2-5. RM16M Connections
V.3600
Installation
2-9