V.25 bis Commands and Responses
The following sections describe the commands used with the V.25 bis
autodialer and explain the responses received when each command is
executed.
Dial Command — CRN nn...n
The dial command is a CRN followed by the number to be dialed
nn...n. The modem accepts up to 40 dial parameters, excluding the
CRN command and any leading spaces.
Responses:
VAL
Valid command received. Transmitted on receiving an error-
free command with no transmission error such as a parity error.
This confirmation is sent before the command is executed.
INVCU Invalid command - command unknown.
Example: TRN (205)-555-0124
INVMS Invalid command - message syntax error.
Examples: CRN;(205)-555-0124
INVPS Invalid command - parameter syntax error.
Examples: CRN (205)-555-0124
INVPV Invalid command - parameter value error.
Examples: CRN (205)-555-012Q
CFIET Call failure - reorder or busy.
CFIRT Call failure - timeout occurred.
CFINT Call failure - no answer back tone.
CFIDT Call failure - no dial tone.
CFIAB Call failure - ABT detected but no carrier.
INC
Incoming ring detected.
CRN; (semicolon invalid)
CRN (205)-555;0124
CRN
CRN
V.3600
V.25 bis Autodialer
11-5