Table of Contents
Advertisement
If the call fails to connect and the number is linked with other numbers,
the autodialer tries to call the next number in the list of linked numbers.
Request List of Stored Numbers — RLN
The request list of stored numbers command is an RLN.
Responses:
INVCU
Invalid command - command unknown.
Example: TLN
INVMS Invalid command - message syntax error.
Example: RLN;
If no number is stored at the specified address nothing is returned for
that address. The separator {sep} is a
<etb><sy><sy><stx>LSN<sp>
sequence for BISYNC format (the last LSN string terminates with
<etx> per V.25 bis). For synchronous bit-oriented operation, each LSN
string is treated as an individual message per V.25 bis.
All stored numbers are sent to the DTE as
LSNa;nn...n{sep}a;nn...n...
where a is the stored number address and nn....n is the number stored.
Disregard Incoming Call — DIC
The command for disregarding an incoming call does not require
parameters. If no call is incoming, the command is ignored.
Responses:
VAL
Valid command received. Transmitted on receiving an error-
free command with no transmission error such as a parity
error. This confirmation is sent before the command is
executed.
INVCU
Invalid command - command unknown.
Example: TIC
INVMS Invalid command - message syntax error.
Example: SIC;
V.3600
V.25 bis Autodialer
11-7
Advertisement
Table of Contents
