Table of Contents
Advertisement
V.25 bis Autodialer
INVPS
This message has one of three possible meanings:
1) Any parameter set ending with a semicolon ;
Any parameter set containing too many or not enough
parameters; this includes any command:
- entered without parameters that requires parameters
- entered with parameters that does not require parameters
2) Any parameter containing too many characters.
INVPV
This message has one of three meanings:
1) Any parameter set containing invalid characters
2) Any parameter or parameter set containing no valid (only
ignored) characters
3) Any parameter set containing an out-of-range parameter
Dial Parameters
Table 11-1 lists and describes the parameters used in autodialing. The
memory available for dialing can hold up to 40 characters. Parameters
inserted for readability are not counted.
Table 11-1. Dial Parameters
Parameters
0 thru 9
* and #
W
>
=
<
P
T
&
;
Space, dash,
parenthesis, period
11-4
Function
DTMF and pulse digit
DTMF digit
Wait for 2nd type of dial tone
Pause for 1 second
Pause for 3 seconds
Pause for programmed delay time
Pulse dialing
Tone dialing
Flash (go on hook) for ½ second
PARM separator
Parameters inserted for readability
V.3600
Advertisement
Table of Contents
