Mesh Enabled Architecture
Figure 27.
Insert the WMC6300 Wireless Modem Card
Complete the following procedure to install the WMC6300 Wireless Modem Card in the
computer.
1. Locate an available Type II PCMCIA card slot in the computer. If necessary, remove the
slot dust cover from the slot.
2. To insure the correct orientation, insert the WMC6300 Wireless Modem Card into the
computer's PCMCIA card slot with the label side up as shown in
Figure 28.
3. The antenna must be attached using the clip and vertically oriented when the laptop is in
use as shown in
Attach Magnetic Mount Antenna to the WMC6300
ATTENTION: Never force the card into the slot.
Installing the WMC6300 Wireless Modem Card
Figure
29.
WMC6300 Windows Users Guide
21
Figure
28.