Supermicro X10SAT User Manual page 96

X10SAT User's Manual
 Hard Disk Drive BBS Priorities
•
1st Device
•
2nd Device
 UEFI Boot Drive BBS Priorities
•
1st Boot Device
 Add New Boot Option
This feature allows the user to add a boot device from which the systems will boot
after power-on.
Add Boot Option
Enter the name of the new boot option here.
Path for Boot Option
Enter the path of the new boot option here.
Create
Press Enter here to create the new boot option.
 Delete Boot Option
Use this feature to remove a pre-defined boot device from which the system will
boot during startup. The settings are [any pre-defined boot device]
 Delete Driver Option
Use this feature to remove a pre-defined driver from which the system will boot
during startup. The settings are [any pre-defined boot device]
 Add New Driver Option
This feature allows the user to add a boot device from which the systems boots
during startup.
Add Driver Option
Enter the name of the new boot option here.
Path for Driver Option
Enter the path of the new boot option here.
Create
Press Enter here to create the new boot option.
4-30