Step 8: Place Top (E) Onto The Unit Carefully.; Step 9: Now Tighten The Four Screws On Each Side.; Care: Dust As Needed With A Soft Cloth. - L.L.Bean MISSION COFFEE TABLE Quick Start Manual

STEP 8
Place top (E) onto the unit
carefully, making sure the tabs of
the brackets fit between the drawer
and sides. Push the drawer into the
frame like the photo at the right
shows. Align the bracket over the
predrilled hole on the side assembly.
Use a 3/8" screw and securely fasten
the bracket to the side assembly.
Repeat to the right side and then
push the drawer through the other
side and repeat to the other 2
brackets.
STEP 9
Now tighten the four screws on each
side and tap in wood plugs gently
with hammer to conceal screw
holes.
CARE
Dust as needed with a soft cloth. Clean with
damp cloth and mild solution of dish soap.
Polish with soft cloth and polish that contains
no pigments or silicone.
www.llbean.com
Product Support 1 800 341 4341