Related Manuals for L.L.Bean Mission Corner Desk
Summary of Contents for L.L.Bean Mission Corner Desk
- Page 1 MISSION CORNER DESK Thank you for purchasing our Mission Corner Desk. Assembly of this product requires a Phillips screwdriver. We found it helpful to have a second person assist with assembly. ANQ4070201...
- Page 2 STEP 1 Read through these instructions thoroughly before beginning assembly. We have found this to be of great value when first assembling this product. STEP 2 Remove all parts and hardware from packing material. Wooden pieces should be placed on a non- abrasive surface (like the carton or carpet) to prevent damage to the finish.
- Page 3 STEP 6 Repeat Step 5 with the other two leg assemblies (A). These two leg assemblies have holes to accommodate the removable shelf. STEP 7 Lay shelves (D and E) flat with holes facing up. Insert a cam lock into each of the four holes. Ensure that the long slot in each cam lock 'points' to the corresponding hole in the edge of the shelf.
- Page 4 STEP 9 Align holes in short edge of long shelf (E) with cam pegs in leg assembly (C) with cam locks pointing toward bottom of finished unit as shown. Press together. Secure by turning cam lock at least 1/2 turn clockwise. Repeat to attach leg assembly (B) to long shelf (E).
- Page 5 STEP 12 Lay leg assembly (A) without countersunk hole flat with cam pegs pointing up. Align holes in edge of fixed shelf (D) with cam pegs. (Ensure that cam locks in shelf (D) face bottom of finished desk as shown at right.) Press pieces together. Secure assembly by turning cam locks at least 1/2 turn clockwise with Phillips screwdriver.
- Page 6 STEP 15 Place removable shelf (G) onto wooden pins ensuring that pins engage grooves in underside of shelf. CARE Dust as needed with a soft cloth. Clean with damp cloth and mild solution of dish soap. Polish with soft cloth and polish that contains no pigments or silicone.