Summary of Contents for L.L.Bean Mission Mudroom Bench
Page 1
Mission Mudroom Bench Thank you for purchasing our Mission Mudroom Bench. Assembly of this product requires a Phillips screwdriver and a hammer. We have found it helpful to have a second person present in at least one step of the assembly.
Page 2
Read through these instructions thoroughly. We have found this to be of great value when first assembling this product. Remove all parts and hardware from packing material. Place wooden parts on non-abrasive surface (like carpet or carton) to prevent damage to finish. Assembly of this product requires a Phillips screwdriver and a hammer.
Page 3
STEP 1 Attach 1 Divider (B) to 2 Middle Shelves (C) as shown on right using predrilled holes. Fasten with 4, 1-1/2” #8 screws. STEP 2 Repeat Step 1 with second Divider (B) by fastening other edge of Middle Shelves (C) to second Divider (B) as shown on right.
Page 4
STEP 4 Place preassembled Middle Shelving Unit into Top (A) as shown on right with remaining predrilled holes on Divider (B) lining up with wood bracket on Top (A). Fasten with 4, 1-1/4” #8 screws. STEP 5 Attach Bottom Shelf (E) to Dividers (B) as shown on right.