Related Manuals for L.L.Bean MISSION COFFEE TABLE
Summary of Contents for L.L.Bean MISSION COFFEE TABLE
- Page 1 MISSION COFFEE TABLE Thank you for purchasing our Mission Coffee Table. Assembly of this product requires a Phillips screwdriver and a hammer. We have found it helpful to have a second person present in at least one step of the assembly.
- Page 2 STEP 1 Read through these instructions thoroughly before beginning assembly. We have found this to be of great value when first assembling this product. STEP 2 Remove all parts and hardware from packing material. Wooden pieces should be placed on a non- abrasive surface (like the carton or carpet) to prevent damage to the finish.
- Page 3 STEP 5 Attach drawer (D) hardware as shown at right. Repeat to other side of drawer, so all 4 pulls are attached. STEP 6 Place Drawer (D) onto the frame assembly resting on the stretchers. Lift one side of drawer up and place shuttle block into groove on drawer side.
- Page 4 STEP 8 Place top (E) onto the unit carefully, making sure the tabs of the brackets fit between the drawer and sides. Push the drawer into the frame like the photo at the right shows. Align the bracket over the predrilled hole on the side assembly.